Category: Fixed Gas Detectors
Showing 1–10 of 23 results
Grid view List view
Beacon 110
Beacon 110 Single Channel Wall Mount Controller
Features
Low cost versatile solution
Compact, weatherproof, NEMA 4X enclosure
115/220 VAC or 24 VDC operation
Long life sensors (2+ years typical)
Accepts RKI LEL/O2/H2S/CO direct connect sensors
Accepts any 4-20 mA transmitter
Audible alarm with reset button
Two programmable alarm levels
Built-in trouble alarm with relay
Relay rating 10 amps, form C
Provides 4-20 mA output
M2A Series
M2A Series Stand Alone Explosion Proof Transmitter
Features
Operates with or without a controller
Direct digital readout with OLED
LEL, O2, H2S, CO, CO2,
100% Vol CH4, and 0-9,000 PPM CH4
Toxic Gases include NH3, SO2, HCN, and more
Infrared sensor for combustibles
4-20 mA & digital Modbus outputs standard
2 fully programmable alarm relays & fail relay
Non-intrusive calibration via magnetic wand
Explosion proof construction
Patented water repellent sensor cover
User friendly setup, push buttons & OLED
Long-life sensors (2+ years typical)
SD-1 Series
SD-1 Series Combustible Gas and Organic Vapor Detector / Transmitter
Features
Wide range of detectable gases
% LEL Combustibles, catalytic
% LEL Combustibles, IR
H2S, CO, & O2
PPM for acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
Sensor types include
Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
Direct digital display of gas readings HART communication protocol
HART over 4-20mA or 4-20mA linear output
Available with SIL2 approval (IR, EC, OX versions) Easy maintenance using a magnetic key Self-diagnosis by microprocessor Low power operation (Maximum: 3W) Explosion proof: ATEX, IECEx, ExdIICT5
Beacon 200
Beacon 200 Two Channel Wall Mount Controller
Features
Simultaneous readout on 2 channels
Two alarm levels per channel
Discrete and common relays
NEMA 4X enclosure
4-20 mA outputs
Proven, long-life sensors for a wide variety of gases
Accepts any 4-20 mA transmitter input (24 VDC)
Easy to install, operate and expand
S2 Series – Gas Sensor/Transmitter
Diffusion Gas Sensor – Fixed Systems
Features
Available gases include
Infrared sensor for combustibles and CO2
Hydrogen-Specific now available
Patented water repellent sensor coating
4-20 mA output
Explosion proof construction
Optional stainless steel junction box
Beacon 410A
Beacon 410A Four Channel Wall Mount Controller
Features
Simultaneously control up to 4 gas monitoring channels
OLED display of all 4 channels
LEL / O2 / CO2 / toxic direct connect sensors
Accepts any 4-20 mA transmitter, 2 or 3 wire
Up to 3 programmable alarm levels per channel
Up to 3 configurable alarm relays per channel
4-20 mA analog & Modbus digital output standard
115 / 220 VAC or 24 VDC operation
Audible alarm with silence feature
RFI / EMI Resistant
Alarm reset switch
Built in trouble alarm with relay
Weather and corrosion resistant NEMA 4X enclosure
H2 Specific Sensor/Transmitter
H2 Specific Sensor/Transmitter
Features
Explosion proof housing and sensor design
H2 specific solid state sensor for 0 – 2000 ppm
H2 specific catalytic sensor for 0 – 100%LEL
Molecular sieve filter built in; highly specific to H2
Eliminates false alarms from IPA and other gases
4-20 mA transmitter, 24VDC
Beacon 800
Beacon 800 Eight Channel Wall Mount Controller
Features
Capable of up to 8 separate channels
Digital display of all 8 channels simultaneously
Compact, weatherproof, NEMA 4X enclosure
85 to 264 VAC or 24 VDC operation
Long life sensors (2+ years typical)
Accepts any 4-20 mA transmitter
Audible alarm with reset button
Two programmable alarm levels per channel
Common alarm and fail relays
Relay rating 3 amps, form C
Low cost versatile solution
Direct Connect Fixed Gas Detector
LEL / H2 / O2 / CO / H2S Gas Sensors
Features
Available gases include
LEL, H2S, CO, & CO2
Toxic sensors include NH3, AsH3, HCN, PH3, and SO2
Infrared sensor for combustibles and CO2
Patented water repellent sensor coating
Explosion proof construction
Optional stainless steel junction box
M-Series
M-Series Low Cost Transmitter
Features
Water/dust resistant housing
Available for H2S and CO
Long life sensors (2 + years typical)
Competitively priced
Compact design
