by Fmeaddons

sdm2012 monitor on stand
sdm2012 callout chart
sdm 2012 mudular unit
sdm 2012 mudular units

SDM-2012

GX-2012 Calibration Station

Stand Alone Calibration Station

Features

Stand Alone Station

  • Stand-alone station (no PC Required)
  • Charging (Li-Ion Battery Pack)
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System

  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Configure GX-2012 parameters
  • 2 Calibration gas ports
  • Archive Bump Test and Calibration records
  • Archive data to network location
  • Software controlled data retrieval
  • Automatic calibration/bump test option
  • Windows 7 compatible
Category:
Contact RKI Sales

Description

RKI’s new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Multi Module System
The SDM-2012 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2012 stations to charge, calibrate, and bump test 10 instruments simultaneously.

User Guide Poster
Each SDM-2012 ships with a pictoral wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2012. It’s ideal to hang in an instrument shop or wherever the GX-2012 is located.

Application

Multi Module System

  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Configure GX-2012 parameters
  • 2 Calibration gas ports
  • Archive Bump Test and Calibration records
  • Archive data to network location
  • Software controlled data retrieval
  • Automatic calibration/bump test option
  • Windows 7 compatible

Specifications

Input Power

 12 VDC NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.

Environmental Conditions

 • For Indoor Use Only • -10° C to 40° C, below 80% Relative Humidity, Non-Condensing

Applicable Instruments

 GX-2012 and Gas Tracer

Maximum Number of Records Saved

 200 (stand-alone)

Number of Calibration Gas Cylinders

 Up to two calibration gas cylinders per bump test or calibration at a time

Standard Accessories
  • AC Adapter
  • USB Flash Drive
  • Single Module Data Viewer Software
  • SDM Docking Station PC Controller Software
  • Inlet Air Filter
  • Instruction Manual
  • 10 Foot Long Exhaust Tube
  • Two 3 Foot Long Tubes for GAS 1 and GAS 2
    Fittings
  • 3 T-Fittings for PC Controlled Configuration
  • USB Cable, Type A to Type B

Specifications subject to change without notice

Ordering Info

Docking Station

81-SDM2012-01

Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing & installation CD

81-SDM2012-02

Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing installation CD & demand flow regulator

81-SDM2012-03

Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator & 58AL cyl H2S (25 ppm)/CO/CH4/O2

81-SDM2012-04

Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator, 58AL cyl H2S (25 ppm)/CO/CH4/O2 & 58L steel cyl Methane 100% volume

81-SDM2012-05

Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, two demand flow regulators, 58AL cyl H2S (25 ppm)/CO/CH4/O2 & 58L steel cyl Methane 100% volume

Calibration Equipment and Accessories

81-0013RK-05

Cylinder, Methane, 50% volume in N2, 58L steel

81-0016RK-05

Cylinder, Methane 100% volume, 58L steel

81-0078RK-03

Cylinder, N2 100%, 103L

81-0085RK-01

Cylinder, Methane, 1000 ppm in Air, 34L

81-0085RK-03

Cylinder, Methane, 1000 ppm Air, 103L

81-0089RK-03

Cylinder, CO 50 ppm / Hexane 15% LEL / O2 12 % in N2, 103L

81-0090RK-01

Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 34L

81-0090RK-03

Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 103L

81-0151RK-02

Cylinder, H2S 25 ppm in N2, 58AL

81-0154RK-02

Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 58AL

81-0154RK-04

Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 34AL

81-1054RK

Regulator, demand flow for 34AL/58AL/103L

81-1055RK

Regulator, demand flow for 17L/34L steel cylinders

81-0155RK-02

Cylinder, H2S 25 ppm / CO 50 ppm / HEX 15% LEL / O2 12% in N2, 58AL

82-6050RK

USB Hub, 4 port 2.0 for SDM-2012

82-6051RK

USB Hub, 7 port 2.0 for SDM-2012

71-8007RK

SDM-GX Product CD

Specifications subject to change without notice.

Download

 

SDM-2012 Software
download
SDM-2012 Standalone Configuration Software 53MB version 05446		 download
SDM-2012 PC Controlled Software 30MB version 05743		 GX-2012 Software
(Gas Monitor)
pdf
SDM-2012 Standalone Configuration Manual 900KB		 pdf
SDM-2012 PC Controlled Configuration manual 6MB

SDM-2012 Literature
SDM-2012 datasheet
SDM-2012 Datatsheet		 SDM-2012 User Guide
SDM-2012 User Guide

SDM-2012 Manuals
SDM-2012 Manual
SDM-2012 Calibration Station Standalone Configuration Manual		 SDM-2012 PC Controlled Configuration
SDM-2012 PC Controlled Configuration Manual

Related products