In-line Oxygen Analyzer for Electronics Industry

High Functionality Oxygen AnalyzerLC-860 High Functionality Oxygen Analyzer

The LC-860 Series oxygen analyzer has been specifically developed for the application of controlling and monitoring oxygen in the electronic industry.  This analyzer enables the user to measure a wide range of oxygen from the ppb level up to 100% Volume Oxygen.  The LC-860 uses a proven zirconium oxide sensor that will provide many years of stable, reliable and precise operation. The LC 860 uses a pump driven system for in-line use that requires AC power supply.

Download Datasheet

Specifications

Type Portable or panel-mounted
Display system O2 conc.; LED Digital, 6 Digits l
Measurement range 0.1ppm 100vol O2
(Oxygen Concentration (less than 1ppm) and 0-1ppm or less is out of warranty.)
Response speed In 30 sec. after changing sampling gas from Inlet. (90% response)
Repeatability Within ±1 % of full scale (Not guaranteed for 1ppm and the 0-1 ppm display range or below)
Sampling system Continuous Suction
Sample gas rate 200±50 ml/min
Sample gas conditions Flow Rate; 1000~2000 ml/min
Pressure; 0.03MPa or less
Humidity; Dew point shall be lower than ambient temperature.
No Flammable Gas, No Halogen Gas, Silica, Corrosive Gas nor Vapor shall be contained.
Recorder output Output signal: DC 0-10 V, insulation/load resistance 500 Ω max.
Communication Conformed to RS-232C
Alarm output Device Error Output
Concentration Error
Self Diagnosis Warm-up Error, CPU Error,Instruments Over Heat Error, and other 11type
Automatic refresh function Apply current to sensor automatically in detecting the deterioration of sensor during air calibration
Ambient temperature 0-40 °C
Warmup time In 20 min.
Dimensions 288(W) × 144(H) × 400(D)mm (Excluding protrusion)
Weight Approx. 10 kg
Gas connection INLET (Sample Gas); Rc 1/8
BYPASS OUT ; Rc 1/8
OUTLET (Sample Gas); Rc 1/4
Power Source Voltage; AC 100V ±10 V Frequency; 50/60 Hz

High Functionality Oxygen Analyzer

The LC-860 Series oxygen analyzer has been specifically developed for the application of controlling and monitoring oxygen in the electronic industry

Related products

Toray oxygen analyzers have been specifically developed for the application of controlling and monitoring oxygen in the electronic industry.  These analyzer enable the user to measure a wide range of oxygen from the ppb level up to 100% Volume Oxygen.