Category: Gas Detector Heads
Showing 1–10 of 18 results
Grid view List view
M2A Series
M2A Series Stand Alone Explosion Proof Transmitter
Features
Operates with or without a controller
Direct digital readout with OLED
LEL, O2, H2S, CO, CO2,
100% Vol CH4, and 0-9,000 PPM CH4
Toxic Gases include NH3, SO2, HCN, and more
Infrared sensor for combustibles
4-20 mA & digital Modbus outputs standard
2 fully programmable alarm relays & fail relay
Non-intrusive calibration via magnetic wand
Explosion proof construction
Patented water repellent sensor cover
User friendly setup, push buttons & OLED
Long-life sensors (2+ years typical)
SD-1 Series
SD-1 Series Combustible Gas and Organic Vapor Detector / Transmitter
Features
Wide range of detectable gases
% LEL Combustibles, catalytic
% LEL Combustibles, IR
H2S, CO, & O2
PPM for acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
Sensor types include
Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
Direct digital display of gas readings HART communication protocol
HART over 4-20mA or 4-20mA linear output
Available with SIL2 approval (IR, EC, OX versions) Easy maintenance using a magnetic key Self-diagnosis by microprocessor Low power operation (Maximum: 3W) Explosion proof: ATEX, IECEx, ExdIICT5
S2 Series – Gas Sensor/Transmitter
Diffusion Gas Sensor – Fixed Systems
Features
Available gases include
Infrared sensor for combustibles and CO2
Hydrogen-Specific now available
Patented water repellent sensor coating
4-20 mA output
Explosion proof construction
Optional stainless steel junction box
H2 Specific Sensor/Transmitter
H2 Specific Sensor/Transmitter
Features
Explosion proof housing and sensor design
H2 specific solid state sensor for 0 – 2000 ppm
H2 specific catalytic sensor for 0 – 100%LEL
Molecular sieve filter built in; highly specific to H2
Eliminates false alarms from IPA and other gases
4-20 mA transmitter, 24VDC
Direct Connect Fixed Gas Detector
LEL / H2 / O2 / CO / H2S Gas Sensors
Features
Available gases include
LEL, H2S, CO, & CO2
Toxic sensors include NH3, AsH3, HCN, PH3, and SO2
Infrared sensor for combustibles and CO2
Patented water repellent sensor coating
Explosion proof construction
Optional stainless steel junction box
M-Series
M-Series Low Cost Transmitter
Features
Water/dust resistant housing
Available for H2S and CO
Long life sensors (2 + years typical)
Competitively priced
Compact design
Model 1017
Explosion Proof Sample Draw LEL Sensor
Features
Monitors 0-100% LEL
Sample-draw with long life internal pump
Cast aluminum alloy housing
Stainless steel inlet and outlet fittings with flame arrestors
Housing and flame arrestors CSA and UL classified for use in hazardous locations Class I, Division I, Groups B, C, & D.
Also available for oxygen monitoring, 0-25% volume
Operates on 24VDC input
Model 35-3001
Sample Draw Sensor / Transmitter
Features
Available in LEL, O2, H2S, CO, CO2, H2 (ppm or LEL)
Multigas versions available with sensors in one enclosure
Internal sample pump with 100’ range
Flowmeter and LED’s for operational status
Low flow indication
NEMA 4X enclosure
Operates on 24VDC input
Optional 4-20mA output
Wastewater Gas Monitoring system
Wastewater Gas Monitoring system Explosion Proof Tri-Sensor Head
Features
3 Sensors, 1 explosion proof housing
Infrared sensors available for combustible gases
Interfaces with Beacon 410 controller
Available for LEL, O2, H2S and CO
Water repellent patented sensor coating
Long life sensors (2 + years typical)
Also available with 2 or 4 sensors
H2S Detection for Drill rigs
H2S Detection Continuous Monitoring for Temporary Drill Sites
Features
H2S detection, 0-100 ppm range
Explosion proof enclosure
Convenient mounting bracket
Easily installed and moveable
Battery clamps for easy connection
Powerful horn and strobe
