Category: Controllers

Showing all 10 results

• 

  Beacon 110

  Beacon 110 Single Channel Wall Mount Controller

  Features

  • Low cost versatile solution
  • Compact, weatherproof, NEMA 4X enclosure
  • 115/220 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts RKI LEL/O2/H2S/CO direct connect sensors
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels
  • Built-in trouble alarm with relay
  • Relay rating 10 amps, form C
  • Provides 4-20 mA output
  Read more
• 

  Beacon 200

  Beacon 200 Two Channel Wall Mount Controller

  Features

  • Simultaneous readout on 2 channels
  • Two alarm levels per channel
  • Discrete and common relays
  • NEMA 4X enclosure
  • 4-20 mA outputs
  • Proven, long-life sensors for a wide variety of gases
  • Accepts any 4-20 mA transmitter input (24 VDC)
  • Easy to install, operate and expand
  Read more
• 

  Beacon 410A

  Beacon 410A Four Channel Wall Mount Controller

  Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure
  Read more
• 

  Beacon 800

  Beacon 800 Eight Channel Wall Mount Controller

  Features

  • Capable of up to 8 separate channels
  • Digital display of all 8 channels simultaneously
  • Compact, weatherproof, NEMA 4X enclosure
  • 85 to 264 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels per channel
  • Common alarm and fail relays
  • Relay rating 3 amps, form C
  • Low cost versatile solution
  Read more
• 

  AC-7400 Analog Controller

  8 or 12 Channel Gas Monitoring

  Features

  • 8 or 12 Channel Wired Monitor That Supports Any 4-20 mA Wired Sensor

  • 12 to 35 VDC Operating Voltage with an Optional AC Power Supply

  • Operating Temperature Range of -40ºC to +70ºC

  • Graphical LCD with LED Backlight

  • 5 Push-Button Interface (ADD, MENU, SUB, SCAN/ HOLD and RESET/ESC)

  • 4 Individually Configurable Alarm Set-Points – Four Front Panel ALARM LED Indicators (Red); 4 Dry- Contact Relays (4 Amps Maximum per Relay)

  • Status LEDs for Power and Fault – Multi-Color Status Light; Amber Fault LED for Indicating System Faults

  • Output options: Wet contact DC fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus

  • NEMA-4X Standard fiberglass enclosure with clear window

  • 1-Year limited hardware warranty

  Read more
• 

  MC-6400 Modbus Controller

  64 Channel Gas Monitoring

  Features

  • 64 Channel Wired Modbus Controller

  • 12 to 35V DC Operating voltage with an optional AC power supply

  • Operating temperature range of -40ºC to +70ºC

  • Graphical LCD with LED backlight

  • 5 Push-button interface (ADD, MENU, SUB, SCAN/ HOLD and RESET/ESC)

  • 4 Individually configurable alarm set-points: Four front panel ALARM LED indicators (Red); 4 dry- contact relays (4 amps maximum per relay)

  • Status LEDs for power and fault: multi-color status light; Amber fault LED for indicating system faults

  • Output options: Wet contact fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus

  • NEMA-4X weather, water, and chemical resistant enclosure

  • 1-Year limited hardware warranty

  Read more
• 

  RM-5000 Multi Gas Monitor System

  RM-5000 Multi Gas Monitor System

  • Bar meter and digital multi-indication
  • High level of visibility
  • Low power consumption
  • Support RS-485 communication function
  • Global standard
  • Compatible with RM-570A/580 series
  Read more
• 

  AirLink 7010 Wireless Controller

  32 Channel Hybrid Controller

  Features

  • 32 Channel hybrid monitor – supports wireless transmitters and up to 4 wired transmitters
  • Radio options: 900 MHz radio or 2.4 GHz Standard
  • 12 to 35 VDC operating voltage with optional AC power supply
  • Operating temperature range of -40ºC to +70ºC
  • 5 Push-button interface (ADD, MENU, SUB, SCAN/ HOLD and RESET/ESC)
  • Two graphical LCD’s with LED backlights
  • Programmable alarms
    • 4 configurable alarm set-points:
    • 4 front panel ALARM LED indicators (Red)
    • 4 dry-contact relays (4 amps maximum per relay)
  • Status LEDs for power and fault: multi-color status light; Amber fault LED for indicating system faults
  • Output options: Wet contact fault DC fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus
  • NEMA-4X standard fiberglass enclosure with clear window; optional stainless-steel enclosure with clear window
  Read more
• 

  AirLink 7032 Wireless Controller

  Wireless Touchscreen Controller

  Features

  • 32 Channel hybrid touchscreen controller – supports wireless transmitters and up to 4 wired transmitters

  • Radio options: 900 MHz radio or 2.4 GHz Standard

  • 12 to 35 VDC operating voltage with optional AC power supply

  • Operating temperature range of -20ºC to +50ºC

  • 7 Inch full color touchscreen

  • Adjustable background gas setting

  • Programmable alarms

  • Status indicator for fault conditions, Amber indicator for system faults

  • Output options: Wet contact fault DC fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus

  • 2GB USB drive included for datalogging

  • 1 Year limited hardware warranty

  • NEMA-4X standard fiberglass enclosure with clear window

  Read more
• 

  AirLink 7543 Wireless Controller

  6 Channel Control Panel

  Features

  • 6 Channel controller accepts up to 6 wireless
    transmitters

  • Radio options: 900 MHz or 2.4 GHz radio standard

  • 3 Programmable alarm set-points

  • 3 Dry-contact alarm relays

  • Status indicator for fault conditions: Amber LED
    indicator for system faults

  • Graphical LCD with LED backlight

  • 12 to 35 VDC operating voltage with an optional AC power supply

  • Operating temperature range of -40ºC to +70ºC

  • NEMA 4X standard fiberglass enclosure with clear lid

  • Output options: RS-485 Modbus or optional WirelessHART®

  • 1-Year limited hardware warranty

  Read more