Stand Alone Calibration Station

RKI’s new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Multi Module System
The SDM-2012 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2012 stations to charge, calibrate, and bump test 10 instruments simultaneously.

User Guide Poster
Each SDM-2012 ships with a pictoral wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2012. It’s ideal to hang in an instrument shop or wherever the GX-2012 is located.

Features
Specifications
Ordering Info
Download

Features

Stand Alone Station

Stand-alone station (no PC Required)
Charging (Li-Ion Battery Pack)
Calibration
Bump Test
Save Bump Test and Calibration records
Bump test and calibration records copy to USB jump drive
Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System

Multiple modules connected to a PC (10 max)
Charging
Calibration
Bump Test
Configure GX-2012 parameters
2 Calibration gas ports
Archive Bump Test and Calibration records
Archive data to network location
Software controlled data retrieval
Automatic calibration/bump test option
Windows 7 compatible

Multiple modules can be connected to a PC (10 max)

Specifications subject to change without notice.

Input Power	12 VDC NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.
Environmental Conditions	• For Indoor Use Only • -10° C to 40° C, below 80% Relative Humidity, Non-Condensing
Applicable Instruments	GX-2012 and Gas Tracer
Maximum Number of Records Saved	200 (stand-alone)
Number of Calibration Gas Cylinders	Up to two calibration gas cylinders per bump test or calibration at a time
Standard Accessories	AC Adapter USB Flash Drive Single Module Data Viewer Software SDM Docking Station PC Controller Software Inlet Air Filter Instruction Manual 10 Foot Long Exhaust Tube Two 3 Foot Long Tubes for GAS 1 and GAS 2 Fittings 3 T-Fittings for PC Controlled Configuration USB Cable, Type A to Type B

Specifications subject to change without notice.

Ordering Information

The SDM-2012 can be ordered using the part numbers from the list below.

Docking Station
81-SDM2012-01	Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing & installation CD
81-SDM2012-02	Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing installation CD & demand flow regulator
81-SDM2012-03	Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator & 58AL cyl H2S (25 ppm)/CO/CH4/O2
81-SDM2012-04	Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator, 58AL cyl H2S (25 ppm)/CO/CH4/O2 & 58L steel cyl Methane 100% volume
81-SDM2012-05	Single point calibration station for GX-2012, model SDM-2012 with AC Adaptor, flash drive, USB cable, tubing, installation CD, two demand flow regulators, 58AL cyl H2S (25 ppm)/CO/CH4/O2 & 58L steel cyl Methane 100% volume
Calibration Equipment and Accessories
81-0013RK-05	Cylinder, Methane, 50% volume in N2, 58L steel
81-0016RK-05	Cylinder, Methane 100% volume, 58L steel
81-0078RK-03	Cylinder, N2 100%, 103L
81-0085RK-01	Cylinder, Methane, 1000 ppm in Air, 34L
81-0085RK-03	Cylinder, Methane, 1000 ppm Air, 103L
81-0089RK-03	Cylinder, CO 50 ppm / Hexane 15% LEL / O2 12 % in N2, 103L
81-0090RK-01	Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 34L
81-0090RK-03	Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 103L
81-0151RK-02	Cylinder, H2S 25 ppm in N2, 58AL
81-0154RK-02	Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 58AL
81-0154RK-04	Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 34AL
81-1054RK	Regulator, demand flow for 34AL/58AL/103L
81-1055RK	Regulator, demand flow for 17L/34L steel cylinders
81-0155RK-02	Cylinder, H2S 25 ppm / CO 50 ppm / HEX 15% LEL / O2 12% in N2, 58AL
82-6050RK	USB Hub, 4 port 2.0 for SDM-2012
82-6051RK	USB Hub, 7 port 2.0 for SDM-2012
71-8007RK	SDM-GX Product CD

Specifications subject to change without notice.

SDM-2012 Datatsheet

SDM-2012 Manual

SDM-2012 Calibration Station Standalone Configuration Manual

SDM-2012 User Guide

SDM-2012 PC Controlled Configuration Manual

Adobe Acrobat Reader® required for viewing

This video is also available on Youtube and CD (by request)

EAGLE 2 PID Response Factors for VOCs

Photoionization detectors are calibrated using isobutylene, but PID is a broadband VOC detection technique, with a sensitivity that differs for each VOC. If you know what VOC you are detecting, then the table below will allow you to calculate the concentration for your specific VOC. Remember, these are approximate values, so for best accuracy you should calibrate with the relevant VOC.

Multiply the indicated concentration by the appropriate Relative Response value to provide an estimate of actual VOC concentration.


Gas / VOC	CAS No.	Formula	Relative Response

What's New