Gas Detection For Life

Leading gas detector manufacturer

 

RKI banner
GX-2009 Calibration Station, SDM-2009

Stand Alone Calibration Station

SDM-2009RKI’s new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Multi Module System
The SDM-2009 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2009 stations to charge, calibrate, and bump test 10 instruments simultaneously.

User Guide Poster
Each SDM-2009 ships with a pictorial wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2009. It’s ideal to hang in an instrument shop or wherever the GX-2009 is located.

  • Features
  • Specifications
  • Ordering Info
  • Download

Features

 

Stand Alone Station

  • Stand-alone station (no PC Required)
  • Charging
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to USB jump drive
  • Includes PC software for viewing/ archiving bump test and calibration records


 

Multi Module System

  • Multiple modules connected to a PC (10 max)
  • Charging
  • Calibration
  • Bump Test
  • Automatic calibration/bump test option
  • Configure GX-2009 parameters
  • Archive Bump Test and Calibration records
  • Archive data to network location
  • Software controlled data retrieval
  • Windows 7 compatible
SDM 2009 Multi Modules
Multiple modules can be connected to a PC (10 max)
 
Specifications subject to change without notice. 

Input Power

12 VDC NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.

Environmental Conditions

• For Indoor Use Only
• -10° C to 40° C, below 80% Relative Humidity, Non-Condensing

Applicable Instruments

GX-2009

Maximum Number of Records Saved

200 (stand-alone). Unlimited with software

Number of Calibration Gas Cylinders

1 Calibration gas, 1 fresh air and 1 exhaust

Standard Accessories

  • AC Adapter
  • USB Flash Drive
  • Single Module Data Viewer Software
  • SDM GX Docking Station PC Controller Program
  • Inlet Air Filter
  • Instruction Manual
  • 10 Foot Long Exhaust Tube
  • One 3 Foot Long Tube for GAS Fitting
  • 2 T-Fittings (for PC Controlled Configuration only)
  • 10 Foot Long 3/16 Inch Tube for GAS manifold-
    ing (used for PC Controlled Configuration only)
  • Check Valve (used for PC Controlled
    Configuration only)
  • USB Cable, Type A to Type B
 
Specifications subject to change without notice. 

Ordering Information

The SDM-2009 can be ordered using the part numbers from the list below.

Docking Station

81-SDM2009-01 Single point calibration station for GX-2009, model SDM-2009 with AC Adaptor, flash drive, USB cable, tubing & installation CD
81-SDM2009-02 Single point calibration station for GX-2009, model SDM-2009 with AC Adaptor, flash drive, USB cable, tubing, installation CD, & demand flow regulator
81-SDM2009-03 Single point calibration station for GX-2009, model SDM-2009 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator & 58AL cyl H2S (25 ppm)/CO/CH4/O2
81-SDM2009-06 Single point calibration station for GX-2009, model SDM-2009 with AC Adaptor, flash drive, USB cable, tubing, installation CD, demand flow regulator & 34AL cyl H2S (25 ppm)/CO/CH4/O2

Calibration Equipment and Accessories

81-0090RK-01 Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 34L
81-0090RK-03 Cylinder, CO 50 ppm / Methane 50% LEL / O2 12 % in N2, 103L
81-0154RK-02 Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 58AL
81-0154RK-04 Cylinder, H2S 25 ppm / CO 50 ppm / CH4 50% LEL / O2 12% in N2, 34AL
81-0158RK-02 Cylinder, H2S 25 ppm / CO 50 ppm / isobutane 50% LEL / O2 12% in N2, 34AL
81-0158RK-04 Cylinder, H2S 25 ppm / CO 50 ppm / isobutane 50% LEL / O2 12% in N2, 58AL
81-1054RK Regulator, demand flow for 34AL/58AL/103L
81-1055RK Regulator, demand flow for 17L/34L steel cylinders
82-6050RK USB Hub, 4 port 2.0 for SDM-2012
82-6051RK USB Hub, 7 port 2.0 for SDM-2012
71-8007RK SDM-GX Product CD

Specifications subject to change without notice. 

Introduction | Description | Operation
Calibration | Maintenance | Setup Mode | PID Sensor


This video is also available on Youtube and CD (by request)

EAGLE 2 PID Response Factors for VOCs

Photoionization detectors are calibrated using isobutylene, but PID is a broadband VOC detection technique, with a sensitivity that differs for each VOC. If you know what VOC you are detecting, then the table below will allow you to calculate the concentration for your specific VOC. Remember, these are approximate values, so for best accuracy you should calibrate with the relevant VOC.

Multiply the indicated concentration by the appropriate Relative Response value to provide an estimate of actual VOC concentration.

spacer spacer spacer spacer

Gas / VOC

CAS No.

Formula

Relative
Response

 

SDM-2009