Sample Draw, 4 in 1 Monitor
GX-2009
4 Gas Confined Space Monitor
GX-2001
Small 4 Gas Personal Monitor
EAGLE 2
6 Gas Sample Drawing
with PID Gas Monitor
EAGLE
6 Gas Sample Drawing Monitor
RX-415
Combination HC/02 Gas Monitor
Hands Free Single Gas
01-Series
Single Gas Personal Monitor
SC-01
Single Toxic Gas Monitor
FP-30
Formaldehyde Gas Detector
OX-82
Personal Oxygen Monitor
RI-413A
Portable Halocarbon Monitor
RI-415
Infrared HC Gas Detector
Single Channel Wall Mount
Beacon 200
2 Channel Wall Mount
Beacon 410
4 Channel Wall Mount
Beacon 800
8 Channel Wall Mount
Pioneer 16R
16 Channel Wall Mount
RM-590 Series
Multi-Channel System
Stand Alone Transmitter
S2-Series
Diffusion Sensor/Transmitter
M-Series
Low Cost CO or H2S Transmitter
Direct Connect
LEL, H2, O2, CO, or H2S
H2 Specific Sensor
Explosion proof, LEL or PPM
GD-70D Series
Intelligent Transmitter
RKI Instruments, Inc.
Phone (800) 754-5165
Fax (510) 441-5650
Multi-Channel Gas Monitoring System
The RM-580 system is available in either a 4, 6, 9, or 12 channel wall mount housings making it easy to fit custom space requirements. The brilliant three color bar graph display is quick and easy to read even from long distances. The RM-580's display changes colors, from green to orange to red, when the alarm set points are activated. For system flexibility, a built-in output signal of 4-20 mA can be used to interface with your existing Programmable Logic Controllers, (PLC). The RM-580 is compatible with the widest range of detector heads. Detector heads can be either diffusion or sample drawing style which will ensure the most accurate delivery of samples given your particular facility or application. The RM-580 system is available in either a 4, 6, 9, or 12 channel wall mount housings making it easy to fit custom space requirements. The brilliant three color bar graph display is quick and easy to read even from long distances. The RM-580's display changes colors, from green to orange to red, when the alarm set points are activated. For system flexibility, a built-in output signal of 4-20 mA can be used to interface with your existing Programmable Logic Controllers, (PLC). The RM-580 is compatible with the widest range of detector heads. Detector heads can be either diffusion or sample drawing style which will ensure the most accurate delivery of samples given your particular facility or application.
Features
- Wide variety of detectable gases and detector heads
- Easy to read 3 color LED bar graph display
- Sample draw or diffusion type sensor heads
- Peak gas concentration hold function
- 2 Alarm levels with relays
- Integrated compact design with easy plug-in type modules
- Wide range of combustible gases detected in both PPM or % LEL ranges
- Auto-ranging from PPM to % LEL available
- Built in alarm test mode
- Auto zero function, auto cal function for % LEL & oxygen
- 4-20 mA output signal
- Wall mount or rack mount designs
Applications
- Petrochemical plants
- Refineries
- Chemical Plants
- Semiconductor
- Gas, Power, and Water Utilities
- Iron and Steel Works
Specifications
Physical |
|
| Dimensions | Height: 6.9” 175 mm Width 19.0” 483 mm Depth 12.0” 305 mm |
| Enclosure | Standard 19” rack mount. |
| Wiring Termination |
Screw type terminal block 12 gauge max. |
Environmental |
|
| Operating Temp | 32°F to 122°F (0°C to 50°C) |
| Storage Temp | -4°F to 158°F (-20°C to 70°C) |
| Relative Humidity |
0 - 95% RH non-condensing |
Inputs |
|
| Direct Wired Sensors |
LEL / PPM Hydrocarbon, Oxygen Remote amp not required for less than 500 feet. |
| 4-20 mA | Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire, 250 mA max standard). A wide variety of RKI/Riken sensors are available with 4-20 mA signals (see List Of Detectable Gases). Wiring distances up to 5,000 feet. |
| Zero Correction | Zero correction and stabilizing soft-ware effectively eliminates all reasonable sensor drift. |
| Sampling Methods | Diffusion and sample draw heads available. |
Outputs |
|
| Relays | 3 relays per channel - (Alarm 1,Alarm 2, Alarm 3 or Fail) 4 common relays - (Alarm 1, Alarm 2, Alarm 3, Fail) Single pole, double throw (SPDT) isolated contacts Rated - 250 VAC to 8A Individual Relay Settings: increasing or decreasing Global Relay Settings: latching or self reset normally energized or normally de-energized time delay for alarm on and alarm off. |
| 4-20 mA | Separate current or voltage outputs for each of the 16 channels; non-isolated, 4-20 mA (into 500 ohms impedance max). |
| 0 - 1 VDC | Optional 0 to 1 VDC (into 200ohms impedance min). |
| 24 VDC | 24 VDC output provided to operate sample drawing adapters. |
| Display | 4 alphanumeric displays with backlighting. 20 characters per line, 4 lines each (16 lines total). |
| Audible | Internal mounted buzzer, 94 dB. Coded output Pulsing = Gas Alarm Steady = Fail |
| Visual | 5 color coded LED’s: Alarm 1, Alarm 2, Alarm 3, Pilot, and Fail. |
Power |
115 VAC or 12 VDC standard Optional: 230 VAC Battery backup option available |
Controls |
5 front mounted push buttons for setup and programming. |
Warranty |
One year materials and workmanship. |
Specifications subject to change without notice.
RKI is proud to introduce and 
announce the release of our new product, the EAGLE 2. Building on the strong success of the popular EAGLE series.
The 2010 Winter Olympics Cauldron was built with a fixed gas detection system using RKI’s products. A Beacon 410 controller and four Direct Connect LEL sensors were installed inside the arms of the
outdoor cauldron.
RKI’s H2 sensors were also used inside the fuel cell buses that transported athletes and spectators, and in the garages and terminals where the buses were used
The GD-70D is a compact transmitter for detection of toxic gases, oxygen, or combustible gases and vapors. This new smart gas detection transmitter series sets a new standard for performance, flexibility, and versatility. The GD-70D sample-draw transmitter offers an array of sensor technologies unmatched in the industry, including unique offerings, such as our hydrogen-specific ppm and LEL versions.
GD-70D