Gas Detection For Life
Leading gas detector manufacturer
RKI product manual PDF download page
RKI product datasheets PDF download page
Material Safety Data Sheet PDF download page
Product literature and marketing materials form
Repair, calibration and warranty service form
Training Class Enrollment
Service and Repair Training registration form
RKI Instruments, Inc.
Phone (800) 754-5165
Fax (510) 441-5650
Single Channel Wall Mount Controller
Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.
Four Channel Wall Mount Controller
Simultaneously displays the gas type, readings, and status of 4 channels. Accepts direct connect sensors for LEL / O2 / H2S / CO / CO2.
Audible alarm with silence feature
Two Channel Wall Mount Controller
Microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s most economical two point controller.
Eight Channel Wall Mount Controller
The 2 large digital displays have backlighting and easily identify both the gas type and the gas concentration for all 8 channels simultaneously.
RKI Celebrates 20 Years of Gas Detection
Sample Draw Sensor / Transmitter
The35-3001 series is a compact sample draw detector assembly with a built-in pump that is powered from 24VDC.
M2A Stand Alone Transmitter for LEL, CO2
The M2A is a replace- ment for the popular M2 transmitter. Significant redesign advance-ments have been made to improve an already successful product.
M2A Gas Transmitter
GX-2012 now has PPM Leak Check Mode
All new GX-2012 models now ship with 3 operating modes as standard: Normal, Leak Check, and Bar Hole mode.
GX-2012 Gas Monitor
Calibration Cylinder Holders Now Available
RKI’s new cylinder holders can secure your cylinders either free standing or mounted to a wall or bench.
Gas Cylinder Holders
Anaerobic Digester Gas Monitor for Biogas
RKI Digester Gas Monitor checks for Methane, CO2, and H2S from digester gas.
Digester Gas Monitor
New Quick Check Cylinder for Portable Multi Gas Detectors
A new option is available now in the U.S. and Canada for performing a quick “bump test” on RKI gas monitors.
Quick Check Gas Cylinder
New Flexible Probe for GX-2012, Gas Tracer and GX-2003
These uniquely designed probes have flexible tubing for the probe tip. The tube is rigid enough to hold a shape so it can be bent to fit an application.Part numbers: 80-0161RK, and 80-0162RK
Purge / Test Procedure Using Model GX-2012
The RKI GX-2012 has been designed for tesing during a purge of gas mains. See our application brief for more information.
Purge / Test Procedure using Model GX-2012
Where to Buy | 800-754-5165 | Copyright © 2014 RKI Instruments, Inc. | All Rights Reserved